{"title":"TBM Master Cylinders \/ Manual Brake Kits","description":"\u003cp\u003eSupplier-fulfilled TBM products. Confirm exact fitment before ordering. Availability and dispatch timing are subject to supplier confirmation.\u003c\/p\u003e","products":[{"product_id":"tbm-tbm-modular-15-16-bore-billet-master-cylinder","title":"TBM Modular 15\/16\" Bore Billet Master Cylinder","description":"\u003cp\u003e\u003cstrong\u003eTBM Modular Billet Master Cylinder 15\/16\" Bore (Reservoir Top)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYears of development have went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Our TBM Billet 15\/16 Master cylinder is only recommended for vehicles running 2 piston front brakes and 4 piston rear brakes. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/tbm-billet-modular-master-cylinder-pushrods\"\u003eClick Here\u003c\/a\u003e for Master Cylinder Pushrods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15\/16\" Bore Modular Master Cylinder Body\u003c\/li\u003e\n\u003cli\u003eReservoir Top\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet Plate OR Integrated LineLock \u003c\/li\u003e\n\u003cli\u003eStandard Length (3.416\") 3\/8-24 Pushrod\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8NPT Plugs\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8NPT to 3an Male Fittings\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Unions\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional or Replacement Items\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable with manual master brake plate kits: \u003ca href=\"https:\/\/tbmbrakes.com\/collections\/manual-brake-conversion-kits\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No","offer_id":68569755910379,"sku":"4-9375MMC-1","price":399.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":68569755943147,"sku":"4-9375MMC-2","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/MRW_0139.jpg?v=1794962756"},{"product_id":"tbm-g-body-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM G-Body TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003eG-Body TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guidline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/p\u003e\n\u003cp\u003eThis requires you to drill your brake pedal for the master cylinder pushrod Kit includes all hardware necessary and rod end.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569756172523,"sku":"TBM20-200","price":399.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569756205291,"sku":"TBM20-201","price":399.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569756238059,"sku":"TBM20-200-1","price":649.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569756270827,"sku":"TBM20-201-1","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-200_G-Body.jpg?v=1794962757"},{"product_id":"tbm-tbm-modular-15-16-bore-billet-master-cylinder-remote-top","title":"TBM Modular Billet Master Cylinder 15\/16\" Bore (Remote Top)","description":"\u003cp\u003e\u003cstrong\u003eTBM Modular Billet Master Cylinder 15\/16\" Bore (Remote Top)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYears of development have went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Our TBM Billet 15\/16 Master cylinder is only recommended for vehicles running 2 piston front brakes and 4 piston rear brakes. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/tbm-billet-modular-master-cylinder-pushrods\"\u003eClick Here\u003c\/a\u003e for Master Cylinder Pushrods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15\/16 Bore Modular Master Cylinder Body\u003c\/li\u003e\n\u003cli\u003eRemote Mount Reservoir Top\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet Plate OR Integrated LineLock \u003c\/li\u003e\n\u003cli\u003eStandard Length (3.416\") 3\/8-24 Pushrod\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8NPT Plugs\u003c\/li\u003e\n\u003cli\u003e(4) 1\/8NPT to 3an Male Fittings\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Unions\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional or Replacement Items\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable with manual master brake plate kits: \u003ca href=\"https:\/\/tbmbrakes.com\/collections\/manual-brake-conversion-kits\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No","offer_id":68569756303595,"sku":"4-9375MMC-3","price":389.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":68569756336363,"sku":"4-9375MMC-4","price":529.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/MRW_0168.jpg?v=1794962758"},{"product_id":"tbm-tbm-modular-billet-master-cylinder-15-16-bore-remote-top-copy","title":"TBM Modular Billet Master Cylinder 1.032\" Bore (Remote Top)","description":"\u003cp\u003e\u003cstrong\u003eTBM Modular Billet Master Cylinder 1.032\" Bore (Remote Top)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYears of development have went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/tbm-billet-modular-master-cylinder-pushrods\"\u003eClick Here\u003c\/a\u003e for Master Cylinder Pushrods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.032 Bore Modular Master Cylinder Body\u003c\/li\u003e\n\u003cli\u003eRemote Mount Reservoir Top\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet Plate OR Integrated LineLock \u003c\/li\u003e\n\u003cli\u003eStandard Length (3.416\") 3\/8-24 Pushrod\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8NPT Plugs\u003c\/li\u003e\n\u003cli\u003e(4) 1\/8NPT to 3an Male Fittings\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Unions\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional or Replacement Items\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable with manual master brake plate kits: \u003ca href=\"https:\/\/tbmbrakes.com\/collections\/manual-brake-conversion-kits\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No","offer_id":68569756500203,"sku":"4-1032MMC-3","price":379.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":68569756532971,"sku":"4-1032MMC-4","price":529.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/MRW_0168_70e30749-bfff-4caf-9dd5-9aa33dbcd90d.jpg?v=1794962758"},{"product_id":"tbm-tbm-modular-1-032-bore-billet-master-cylinder-copy","title":"TBM Modular 1.032\" Bore Billet Master Cylinder","description":"\u003cp\u003e\u003cstrong\u003eTBM Modular Billet Master Cylinder 1.032\" Bore (Reservoir Top)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYears of development have went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/tbm-billet-modular-master-cylinder-pushrods\"\u003eClick Here\u003c\/a\u003e for Master Cylinder Pushrods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.032\" Bore Modular Master Cylinder Body\u003c\/li\u003e\n\u003cli\u003eReservoir Top\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet Plate OR Integrated LineLock \u003c\/li\u003e\n\u003cli\u003eStandard Length (3.416\") 3\/8-24 Pushrod\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8NPT Plugs\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8NPT to 3an Male Fittings\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Unions\u003c\/li\u003e\n\u003cli\u003e(2) 3an Male Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional or Replacement Items\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable with manual master brake plate kits: \u003ca href=\"https:\/\/tbmbrakes.com\/collections\/manual-brake-conversion-kits\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No","offer_id":68569757122795,"sku":"4-1032MMC-1","price":399.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":68569757155563,"sku":"4-1032MMC-2","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/MRW_0139_027d4fb7-4fcd-4829-8d6d-f84b6a37fa8a.jpg?v=1794962759"},{"product_id":"tbm-modular-master-cylinder-bench-bleeding-kit","title":"TBM Modular Master Cylinder Bench Bleeding Kit","description":"\u003cp\u003eTBM Brakes Modular Master Cylinder Bench Bleeding Kit - 41-0015-KIT \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe TBM Brakes Bench Bleeding Kit includes the necessary fittings to properly bench bleed your master cylinder before installation. Designed to simplify \u0026amp; Improve the bleeding process, this kit allows you to remove trapped air from the master cylinder before mounting it to the vehicle, helping ensure a firm, consistent brake pedal and reducing installation time. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis kit is designed to be used on the \u003cstrong\u003eside ports\u003c\/strong\u003e of our TBM Modular Master cylinder with either option of the standard outlet plate or our integrated line lock outlet. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eKey Benefits:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eIncludes necessary fittings for bench bleeding\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemoves trapped air before installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelps achieve a firm, consistent brake pedal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReduces installation time and simplifies the bleeding process\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMakes initial brake system setup easier and more efficient\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 3an Male to 3\/16 Barb Aluminum Fittings\u003c\/li\u003e\n\u003cli\u003e(2) 3\/16 Silicone hoses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":68569757745387,"sku":"41-0015-KIT","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/mastercylinderbleedkit.jpg?v=1794962761"},{"product_id":"tbm-1979-93-fox-body-tbm-modular-billet-15-16-bore-master-cylinder-conversion-kit","title":"TBM 1979-93 Fox Body TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e1979-93 Fox Body TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote: This kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this will move the master cylinder location up in existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569757778155,"sku":"TBM20-100","price":479.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569757810923,"sku":"TBM20-101","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569757843691,"sku":"TBM20-100-1","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569757876459,"sku":"TBM20-101-1","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-100_Fox_Body.jpg?v=1794962762"},{"product_id":"tbm-1994-04-sn95-new-edge-mustang-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM 1994-04 SN95 New Edge Mustang TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e1994-04 SN95 New Edge Mustang TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem 15\/16 bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis requires you to drill your brake pedal for the master cylinder pushrod Kit includes all hardware necessary and rod end.\u003c\/p\u003e\n\u003cp\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569759613163,"sku":"TBM20-120","price":479.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569759645931,"sku":"TBM20-121","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569759678699,"sku":"TBM20-120-1","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569759711467,"sku":"TBM20-121-1","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-120_SN95.jpg?v=1794962773"},{"product_id":"tbm-s550-mustang-manual-master-cylinder-kit-f1-front-caliper-20-171","title":"TBM S550 Mustang TBM Modular 15\/16\" Bore Billet Master Cylinder Conversion Kit","description":"\u003ch3\u003eS550 Mustang TBM Modular 15\/16\" Bore Billet Master Cylinder Conversion Kit\u003c\/h3\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development have went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Our TBM Billet 15\/16 Master cylinder is only recommended for vehicles running 2 piston front brakes and 4 piston rear brakes. \u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6.5:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem 15\/16 bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: We recommend a 6.5:1 pedal ratio on all manual brake systems \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e*This kit does not have a push rod included, it uses the stock push rod\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e*You will need to run a brake pressure switch for brake lights*\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cem\u003eNote: Slight modification to existing bolt holes on firewall needed to accommodate brake plate. Additionally, factory pedal assembly needs to be removed and studs going through firewall to hold factory master cylinder need to be removed from pedal assembly by cutting as bolts will be put in place\u003c\/em\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/TBM_S550_Manual_Brake_Install_Guide.pdf?v=1716556259\"\u003e\u003cspan\u003e\u003cstrong\u003eS550 Manual Master Cylinder Kit Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this requires you to modify the existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDue to the difference in pedal travel based off of the required manual master cylinder ratio, brake light switch may require modification to work properly based off of pedal position.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/tbmPEDALratioillustrationcopy_1024x1024.jpg?v=1686849258\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e Do's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e \u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No","offer_id":68569761841387,"sku":"TBM20-171","price":499.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":68569761874155,"sku":"TBM20-171-1","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-170_S550.jpg?v=1794962784"},{"product_id":"tbm-motion-raceworks-1993-02-camaro-firebird-4th-gen-f-body-billet-aluminum-master-cylinder-conversion-kit-20-10004-3t","title":"TBM 1993-02 Camaro \/ Firebird 4th Gen F-Body TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e1993-02 Camaro \/ Firebird 4th Gen F-Body TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, the mounting position on the brake pedal will be different to accommodate the necessary 6:1 pedal ratio intended for manual brake systems. Please see installation instructions below for proper pushrod location.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" height=\"758\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/mitch-instructions-2_480x480.jpg?v=1679671460\" width=\"585\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569763217643,"sku":"TBM20-180","price":479.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569763250411,"sku":"TBM20-181","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569763283179,"sku":"TBM20-180-1","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569763315947,"sku":"TBM20-181-1","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-180_4th_Gen_Camaro.jpg?v=1794962798"},{"product_id":"tbm-tbm-1988-5-1993-s10-sonoma-blazer-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM 1988.5-1993 S10 Sonoma Blazer TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e1988.5-1993 S10 Sonoma Blazer TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem 15\/16 bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eNote: This kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this will move the master cylinder location up in existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Please note: it is necessary to drill a new hole in your pedal to facilitate the pushrod.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569763479787,"sku":"TBM20-130","price":479.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569763512555,"sku":"TBM20-131","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569763545323,"sku":"TBM20-130-1","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569763578091,"sku":"TBM20-131-1","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-130_S-10_82-93.jpg?v=1794962800"},{"product_id":"tbm-1995-04-s10-sonoma-blazer-jimmy-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM 1995-04 S10 \/ Sonoma Blazer \/ Jimmy TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e1995-04 S10 \/ Sonoma Blazer \/ Jimmy TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cdiv class=\"description bottom\"\u003e\n\u003cp\u003eEngineered to perfection. This S10 Manual Brake Master Cylinder Kit has everything you need to convert your 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, S10 Blazer or Sonoma to Manual Brakes.\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem 15\/16 bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e***Please Note: It is necessary to drill a new hole in the brake pedal to accommodate the brake pushrod.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFor full install video click the video below!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8ytfmkb2gQc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: We recommend a 6\u003c\/strong\u003e\u003cstrong\u003e:1 pedal ratio on all manual brake systems \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_links\"\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569763610859,"sku":"TBM20-140","price":479.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569763643627,"sku":"TBM20-141","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569763676395,"sku":"TBM20-140-1","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569763709163,"sku":"TBM20-141-1","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-140_S-10_95-04.jpg?v=1794962800"},{"product_id":"tbm-88-98-silverado-obs-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM 88-98 SILVERADO OBS TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e88-98 SILVERADO OBS TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem bore Master Cylinder\u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e*Note: Slight modification to existing bolt holes on firewall needed to accommodate brake plate. Additionally, factory pedal assembly needs to be removed and studs going through firewall to hold factory master cylinder need to be removed from pedal assembly by cutting as bolts will be put in place*\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this requires you to modify the existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio. \u003c\/p\u003e\n\u003cp\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDue to the difference in pedal travel based off of the required manual master cylinder ratio, brake light switch may require modification to work properly based off of pedal position.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569797230827,"sku":"TBM20-110","price":489.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569797263595,"sku":"TBM20-111","price":489.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569797296363,"sku":"TBM20-110-1","price":639.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569797329131,"sku":"TBM20-111-1","price":639.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-110_Silverado_OBS.jpg?v=1794963137"},{"product_id":"tbm-2nd-gen-camaro-firebird-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM 1970-81 2nd Gen Camaro \/ Firebird TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e2nd Gen Camaro \/ Firebird TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development have went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/15_16_Bore_Modular_Master_Cylinder_4-9375MMC-X.pdf?v=1775125627\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e*Note: Slight modification to existing bolt holes on firewall needed to accommodate brake plate. Additionally, factory pedal assembly needs to be removed and studs going through firewall to hold factory master cylinder need to be removed from pedal assembly by cutting as bolts will be put in place*\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this requires you to modify the existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio. \u003c\/p\u003e\n\u003cp\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDue to the difference in pedal travel based off of the required manual master cylinder ratio, brake light switch may require modification to work properly based off of pedal position.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569797361899,"sku":"TBM20-150","price":479.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569797394667,"sku":"TBM20-151","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569797427435,"sku":"TBM20-150-1","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569797460203,"sku":"TBM20-151-1","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-150_2nd_Gen_Camaro.jpg?v=1794963138"},{"product_id":"tbm-3rd-gen-camaro-firebird-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM 1982-92 3rd Gen Camaro \/ Firebird TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e3rd Gen Camaro \/ Firebird TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this requires you to modify the existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio.  Template included in package.\u003c\/p\u003e\n\u003cp\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to the difference in pedal travel based off of the required manual master cylinder ratio, brake light switch may require modification to work properly based off of pedal position.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569797492971,"sku":"TBM20-160","price":489.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569797525739,"sku":"TBM20-161","price":489.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569797558507,"sku":"TBM20-160-1","price":639.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569797591275,"sku":"TBM20-161-1","price":639.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-160_3rd_Gen_Camaro.jpg?v=1794963139"},{"product_id":"tbm-99-07-silverado-tbm-modular-15-16-bore-billet-master-cylinder-conversion-kit","title":"TBM 99-07 Silverado TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)","description":"\u003cp\u003e\u003cstrong\u003e99-07 Silverado TBM Modular Bore Billet Master Cylinder Conversion Kit (Choose Bore Size)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize our TBM Modular Billet Tandem Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit. Includes all hardware necessary.\u003c\/p\u003e\n\u003cp\u003eYears of development have went into this all new TBM Billet Modular Master Cylinder which answers the needs of racers and hot rodders alike. For years our brakes have rapidly developed to create world class braking systems. However, the control system of a car's braking system is the master cylinder. While most brake master cylinders are cast spinoffs of old technology that lack options in internal and physical outside sizing, have leaking issues, and reliability issues. The TBM brake master is a ground up engineered design to remedy those questions and offer new solutions for builders.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSizing Guideline\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15\/16\" Bore Size: Our TBM Billet 15\/16\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003eonly recommended\u003c\/span\u003e for vehicles running 2 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.032\" Bore Size: Our TBM Billet 1.032\" Master cylinder is \u003cspan style=\"text-decoration: underline;\"\u003erecommended\u003c\/span\u003e for vehicles running 4 piston front brakes and 4 piston rear brakes at 6:1 Pedal Ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Cylinders held to exact tolerance and precision for out of the box performance\u003c\/li\u003e\n\u003cli\u003eCompact Design fits where others don't (an inch or more shorter than standard masters)\u003c\/li\u003e\n\u003cli\u003eModular design allows for adaptability on the top (reservoir) and bottom (outlet plate)\u003c\/li\u003e\n\u003cli\u003eSymmetrical Outlet plate gives you the ability to run the outlet fittings on either side of the master cylinder\u003c\/li\u003e\n\u003cli\u003eStandard outlet plate offers better line routing than traditional master cylinders with down facing or side facing outlet fittings\u003c\/li\u003e\n\u003cli\u003e3an Female \u0026amp; 1\/8\" NPT outlet fittings\u003c\/li\u003e\n\u003cli\u003eFully captured pushrod (Zero risk of pulling out)\u003c\/li\u003e\n\u003cli\u003eHard Coated pistons avoid internal wear and debris with extended use that can clog and degrade brake caliper and system performance\u003c\/li\u003e\n\u003cli\u003eFront threaded mounting holes offer ability to rigid mount the front of the master cylinder in chassis cars with add on steel plate\u003c\/li\u003e\n\u003cli\u003eOring construction for zero leaks\u003c\/li\u003e\n\u003cli\u003eEasily swap from reservoir to remote mount with P\/N 41-0004\u003c\/li\u003e\n\u003cli\u003e1lb. lighter than most aftermarket tandem master cylinders\u003c\/li\u003e\n\u003cli\u003eBright Black Anodize finish for ultimate durability\u003c\/li\u003e\n\u003cli\u003eEPDM Seals\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eMade completely in the USA in Bradenton, FL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate\u003c\/li\u003e\n\u003cli\u003eTBM Modular Billet Aluminum Tandem bore Master Cylinder \u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e*Note: Slight modification to existing bolt holes on firewall needed to accommodate brake plate. Additionally, factory pedal assembly needs to be removed and studs going through firewall to hold factory master cylinder need to be removed from pedal assembly by cutting as bolts will be put in place*\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this requires you to modify the existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio. \u003c\/p\u003e\n\u003cp\u003e***Note: Factory brake master cylinders typically connect at a 3-4:1 pedal ratio. This kit may require you to drill your brake pedal to achieve the correct pedal ratio for the master cylinder cylinder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDue to the difference in pedal travel based off of the required manual master cylinder ratio, brake light switch may require modification to work properly based off of pedal position.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/tbmPEDALratioillustration_copy_fa511773-9704-469d-9094-0900cd6468f1_600x600.jpg?v=1660763197\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDo's and Don'ts for proper master cylinder setup: Must Watch!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"No \/ 15\/16\"","offer_id":68569797624043,"sku":"TBM20-190","price":479.99,"currency_code":"USD","in_stock":true},{"title":"No \/ 1.032\"","offer_id":68569797656811,"sku":"TBM20-191","price":479.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 15\/16\"","offer_id":68569797689579,"sku":"TBM20-190-1","price":629.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ 1.032\"","offer_id":68569797722347,"sku":"TBM20-191-1","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/20-110_Silverado_OBS_d004884e-468f-4785-b0a8-39bcd97dd10a.jpg?v=1794963140"},{"product_id":"tbm-tbm-modular-master-cylinder-reservoir-cap-mopar-style","title":"TBM Modular Master Cylinder Billet Reservoir Cap (Mopar Style)","description":"\u003cp\u003e\u003cstrong\u003eTBM Modular Master Cylinder Billet Reservoir Cap (Mopar Style)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTBM Modular Master Cylinder Billet Reservoir Cap is designed to give an OEM level brake reservoir seal while retaining a vented pass-through cap. Our Billet caps ensure there are no leaks under hard acceleration and deceleration that could cause harmful brake fluid to get in your engine bay. Each cap is precision machined for the perfect fit and comes standard with a Black Anodized finish. \u003c\/p\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cp\u003eOur billet caps will work on any Mopar Style Master (Plastic Cap Version) \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TBM Billet Reservoir Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":68569798639851,"sku":"41-0008-1","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/IMG-4816.jpg?v=1794963158"},{"product_id":"tbm-tbm-modular-master-cylinder-front-support-bracket","title":"TBM Modular Master Cylinder Front Support Bracket","description":"\u003cp\u003e\u003cstrong\u003eTBM Modular Master Cylinder Front Support Bracket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TBM Modular Master Cylinder front support plate is designed to give a place to weld a front support rod\/mount to the master cylinder for necessary applications. \u003c\/p\u003e\n\u003cp\u003eMaterial: Chromoly\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 1\/8\" Modular Master Cylinder Front Chromoly Plate\u003c\/li\u003e\n\u003cli\u003e(2) Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":68569798672619,"sku":"41-0011-KIT","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/IMG-1528.jpg?v=1794963157"},{"product_id":"tbm-tbm-billet-modular-master-cylinder-pushrods","title":"TBM Billet Modular Master Cylinder Pushrods","description":"\u003cp\u003eTBM Billet Modular Master Cylinder Pushrods\u003c\/p\u003e\n\u003cp\u003eWhether you are looking for a specific master cylinder rod length for your vehicle or adapting our modular master cylinder to a custom setup, we have the pushrod size you need. \u003c\/p\u003e\n\u003cp\u003eIncludes: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne Master Cylinder Pushrod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnly works with TBM Billet Modular Master Cylinder\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Fox Body \/ SN95 Mustang or 3.416\"","offer_id":68569798738155,"sku":"20-10023T","price":14.99,"currency_code":"USD","in_stock":true},{"title":"82-93 S10 \/ 70-81 Camaro or 5.619\"","offer_id":68569798770923,"sku":"20-10025T","price":14.99,"currency_code":"USD","in_stock":true},{"title":"94-04 S10 \/ S550 Mustang or 4.655\"","offer_id":68569798803691,"sku":"20-10024T","price":14.99,"currency_code":"USD","in_stock":true},{"title":"93-02 Camaro or 1.960\"","offer_id":68569798836459,"sku":"20-10022T","price":14.99,"currency_code":"USD","in_stock":true},{"title":"G-Body or 2.711\"","offer_id":68569798869227,"sku":"20-10031","price":14.99,"currency_code":"USD","in_stock":true},{"title":"FFP Pedal Assembly or 2.935\"","offer_id":68569798901995,"sku":"20-10032T","price":14.99,"currency_code":"USD","in_stock":true},{"title":"3rd Gen Camaro","offer_id":68569798934763,"sku":"20-10021T","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/IMG-1041.jpg?v=1794963158"},{"product_id":"tbm-tbm-billet-modular-master-cylinder-outlet-hardware-kit","title":"TBM Billet Modular Master Cylinder Outlet Hardware Kit","description":"\u003cp\u003eTBM Billet Modular Master Cylinder Outlet Hardware Kit\u003c\/p\u003e\n\u003cp\u003eReplacement Outlet plate O-Rings and Hardware\u003c\/p\u003e\n\u003cp\u003eOnly works with TBM Billet Modular Master Cylinder\u003c\/p\u003e\n\u003cp\u003eIncluded:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(6) Stainless outlet to master cylinder body screws\u003c\/li\u003e\n\u003cli\u003e(2) Inlet O-Rings\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":68569798967531,"sku":"007-0018","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/OutletBolts.jpg?v=1794963159"},{"product_id":"tbm-tbm-billet-modular-master-cylinder-inlet-hardware-kit","title":"TBM Billet Modular Master Cylinder Inlet Hardware Kit","description":"\u003cp\u003eTBM Billet Modular Master Cylinder Inlet Hardware Kit\u003c\/p\u003e\n\u003cp\u003eReplacement Inlet plate O-Rings and Hardware\u003c\/p\u003e\n\u003cp\u003eOnly works with TBM Billet Modular Master Cylinder\u003c\/p\u003e\n\u003cp\u003eIncluded: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Stainless inlet to master cylinder body screws\u003c\/li\u003e\n\u003cli\u003e(2) Inlet O-Rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":68569799000299,"sku":"007-0019","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/InletHardware.jpg?v=1794963159"},{"product_id":"tbm-tbm-billet-modular-master-cylinder-reservoir-hardware-kit","title":"TBM Billet Modular Master Cylinder Reservoir Hardware Kit","description":"\u003cp\u003eTBM Billet Modular Master Cylinder Reservoir Hardware Kit\u003c\/p\u003e\n\u003cp\u003eReplacement Reservoir O-Ring and Hardware\u003c\/p\u003e\n\u003cp\u003eOnly works with TBM Billet Modular Master Cylinder\u003c\/p\u003e\n\u003cp\u003eIncluded: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Stainless reservoir hardware\u003c\/li\u003e\n\u003cli\u003eInlet O-Rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-fulfilled through TBM, subject to current availability and dispatch confirmation. Not stocked for immediate pickup at Henderson Race Shop. Shipping and delivery dates are not guaranteed. Confirm exact fitment before ordering.\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":68569799065835,"sku":"007-0020","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9555\/1211\/files\/ReservoirHardware.jpg?v=1794963161"}],"url":"https:\/\/hendersonraceshop.com\/collections\/tbm-master-cylinders-manual-brake-kits.oembed","provider":"Henderson Race Shop Store","version":"1.0","type":"link"}